The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

removing J type overdrive 120-130

I would first check to see if the lockout switch is there, but not hooked up (See attached picture for the location-It's a D-type OD, but I think they are all in the same place). There might be a plug (which I never seen before) there too.

Photobucket

If not, you will need to remove the transmission cover. I would pull the transmission to do it. You need to check to make sure that everything is correct like the gasket is on right-> best when you have it on the bench. Also, make sure you use a fiber gasket, and not cork one!

I added a switch to a M40 transmission cover because I used a '75 M41 with the remote shifter, I think I either have a bad switch (it was a used one) or I didn't screw it down enough. Sometimes when I'm travelling down the highway in OD and hit a bump, the transmission comes out of OD (I'm using a '81 240 OD relay, so it shifts to 4th gear). So, I'm going to have to replace the lockout switch with a new one I have.

Paul






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.