The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Help! Distributor OOPS! 120-130 1967

I've read the other posts, and while they all have merit, no one tied the whole process together. The distributor drive is offset and can only engage the drive gear in one position, so even if the motor has been turned (compression test?), the distributor will be in proper relation when it is set back in place. The only danger with removing the aluminum distributor mount is that the drive gear could get lifted out of position while cranking--but that's a remote possibility. Take a screwdriver and push down on the gear to be sure. I've always serviced distributors on the bench, but remove it by loosening the pinch bolt. Assuming things have been kept original number 1 should face forward, angled towards the block -- 3,4,and 2 counterclockwise from 1--you'll find a slash on the upper ridge of the distributor indicating number one. If your distributor has a vacuum unit it usually sits towards the firewall about a fingers width from the block.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.