The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

ALMOST 2 YEARS-STILL WON'T RUN---ANY IDEAS APPRECIATED!! 700

Opinion free...

• Cam sprocket roll pin sheared? Crank-to-Cam timing will look good (have you checked this?). Sprocket may/will still turn camshaft, but valve timing will be off.
[Don't know about turbo cam but non-turbo M cam will have #1 lobe pointing inboard and upward about 30°, with #2 pointing outboard almost horizontally.

• Intermittent loss of EZK timing pulses to LH ECU? (LH dead or shuts down). One solid case here on a '91 Regina (same harness as Bosch–chafed wire from EZK, under dash).

• If you suspect the CPS bracket, they are only $16.64 from Tasca Volvo. (Scroll down to search box 2. Part # 3507510-0


--
Bruce Young
'93 940-NA (current), 240s (one V8), 140s, 122s, since '63.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.