The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

re. "engine is very lean' 120-130

Your engine is very lean. Tell us what needles are in the SU's.

I've not overhauled or disassembled the SU's. It's a 1967 model year and I'm *certain* that the carbs are original to the B18 that I pulled from the car and that the engine/car had a true 166k miles on it before this engine swap.

Is it known, with any certainty, which needles were installed stock on 1967 B18 equipped amazons. It was/is a sea-level California car, if that matters.

You need more fuel before you stomp on that engine.

Even though I was certainly taking it easy, I'm going to try and answer some of these questions that came up before I drive it any more. Is new needles a must, or would richening the mixture at the carbs by a couple flats be a safe-enough intermediary measure to get her back on the road? I still haven't decided what to do re. carburation- whether to try new needles in the SU's, whether to send the SU's out for a proper rebuild, or whether to invest my time and energy into the set of rebuilt side draft Dell'Orto's that I picked up a while back.

BP6HS is all you will need - the 7's are a big jump, and unless you'll be thrashing it continuously they will be too cold.

I don't plan on thrashing for a while, but once she's ready, I do plan on driving her properly, possibly including some SCCA runnings. I'll hold off on the 7's until I think she's ready for some pushing and I've got some of these other fuel issues sorted out.

Thanks for the input.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.