The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Coils 120-130

After my nightmarish allison ignition system failure, I put a 140-series blue bosch coil into my Sedan.

I did the same with my wagon, and I made a large coverplate to cover the coil hole, and two big 1-1/2" AC line holes in the firewall. I sealed it all up with 3M weatherstripping goop and finished it off will self-tapping sheet metal screws.

I did not want to do that my sedan (since the firewall was intact), so I took a blue coil found a good balance point and wrapped *A LOT* of tape around it. This made a nice stop for the coil. Then I wrapped a strip of that sticky butyl rubber stuff around the coil under the tape-stop and dropped it in. The rubber holds the coil nicely and plugs the hole while maintaining the stock fit and orientation of the coil. I had a spare ignition socket, and I simply swapped it and ran the new heavy ignition wire though an existing hole in the firewall up to the coil.

Here's a close-up






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.