The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Camshaft R&R checklist 700 1990

I wish there were a way to replace the valve seals without removing the head, because I am sure they are brittle, too. If I could replace them, then the head would have all new rubber.

It can be done. Camshaft removed. You rotate the crankshaft until the cylinder is at TDC (valves closed). There is a device that screws into the sparkplug hole and accepts an air chuck. Apply air to force the valves to remain closed.

Now the hard part. Find the tool that will compress the valve spring so as to remove the keepers and release the tension. Remove the spring and replace the seal (there are only four to do the exhaust valves do not have seals).

These tools are available but you need to find one that will work on the Volvo. Within the last year a person with a broken Volvo valve spring reported his success at fabricating a tool and replacing the spring.

Randy







USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.