The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

it is very straighforward, do not be afraid to pull it and take a look. 120-130

They are very straightforward, but repair might not be easy or possible.

First remove the sending unit and examine the windings. It is a simple affair with a resistor dragging across resistor windings. If the windings get corroded or worn-out in spot the gauge becomes unreliable.

I'd guess that you've either got corrosion (cleanable) or the wires are worn through (bad).

It's definitely worth looking at.

Also, check the unit with a multimeter (ohms) when you have it out. Others BB members will give you the proper ohm values that the sender should return when at the top or bottom.

I had to rebuild the sender in my sedan (it was amazingly corroded) but a very simple fix.

I also repaired the sender in my 940 and that's now part of the 700/900 FAQ.
http://www.brickboard.com/FAQ/700-900/FuelSystem.htm#940FuelSenderRepair

Be cautious, but don't be afraid of the gas.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.