The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Washer Fluid System 700

posted by  someone claiming to be joe on  Wed Mar 19 08:07 CST 2008 [RELATED]

Disconnect the intake bellows, pull the airbox.
Use a flashlight to see how the airbox is installed.

I would try sealing the fluid tank with goop, clean it with acetone first.

Check for power at the 2 pump plugs.
Clean plugs and connectors on pump , dialectric grease works on these to prevent a reccurence.

The pumps just plug into rubber seals at the bottom of the tank.
Thats probably where they're leaking, clean eveything up and try a coating of silicone to seal.

Other things to check is the checkvalve and the nozzle on the hood.
I just put new nozzles on mine.
My rear window pump is dead so I just route the tubing to do the windshield, mine is a wagon. 1990 740.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.