The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Problem piston (B16) 444-544 1958

A few years ago I posted pix of the pistons from the Yellow Peril, a 73 145E,
which had been run in the Arizona desert without an air cleaner. Several pistons
were in similar shape.
I'd recommend that you measure the cylinder very carefully before going back
with a standard piston, as the bore may be oversized or otherwise damaged.
Ring breakage can have a number of causes some of which include an unbroken top
cylinder ridge, insufficient ring end-gap when installed, too wide a ring groove
in the piston or ring seizure from other causes. The ring might have been broken
on installation due to faulty ring compression or too rough handling on installation.
In any case it is hard to imagine that that much damage to a piston would not be
accompanied by at least SOME damage to the bore.
--
George Downs, Bartlesville, Heart of the USA!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.