The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

91 245 hard start after fuel pump replacement 200

Just started driving a 91 245 that hadn't been used for 4 years and had some messy repairs.

Replaced plugs, wires, cap, rotor, in-tank pump (which had failed); serviced throttle body; replaced CPS; cleaned all fuses in interior block.

Drove yesterday and had no power + bad knocking.

Today I replaced main fuel pump and fuel filter, and spark plugs. Removed airbox flap. Re-tightened grounds.

Car has more power and doesn't knock but it's hard to start: requires 3-4 attempts before it will catch and stay running. It used to start right away - lean in, hit the key, 2-3 turns of the started and it was running smoothly at idle.

The pump I used is out of a 1986 240. Any chance the 91 pump had an internal check valve - vs the 86 pump which expects a separate in-line valve.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.