The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Has anyone here used a Scantech control arm from FCP? 200 1989

I was going to refurb a rusty driver side front control arm and replace shot bushings. Turns out its just too pitted for my comfort level. So my options are:

Pull one off a junker. Problem is a few I remember seeing are either lying in dirt/rocks bare nekid on their control arms (yards here dont seem to like to lift 240 up on rims) or like mine project, its been soaked in brake fluid for years from a leaking brake junction box and all the undercoating is gone and its rusted.
I'm sure I could look hard enough and find a clean one. Thoughts?

So I'm thinking option B: buy a new Scantech replacement control arm from FCP. Has anyone used/installed one (or two) of these? And if you HAVE what are your thoughts (quality good, does it seem to be lasting, is it spot-on identical to original...etc.).

TAA (thanks in advance)
~jason
--
89 245 'loaded' with a Great Pyrenees






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.