The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Short List 200 1993

Inspect the oil pressure switch wiring harness on the engine. The OPS is mounted next to the oil filter on the passenger side of the engine. If the insulation of that wire is trashed due to the typical oil soak, it could be shorting to the block causing the light to come on. Note that this wire runs under the crank pulley at the front of the engine in the harness. It is rare that a 93 has wiring rot, but I have seen it on a 92.

Finally, if the harness is perfect, remove the oil pressure switch and connect a oil pressure gauge to the block. If it reads good, then the problem is definitely an electrical issue.

--
92 245 250K miles, IPD'd to the hilt, 06 XC70, 00 Eclipse custom Turbo setup...currently taking names and kicking reputations!






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.