The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Need Help No Cranking 200

Hi
I have started to change the timing belt which was overdue . I have removed all belts and am trying to remove center bolt. I tried a 1/2 " drive with a pipe over it for leverage .Car is manual so stuck it in 4th gear, hand break on and tried manually couple of times but then thought of using crank power.

I removed the HT wire from ignition coil and stuck the 1/2 drive with the help of pipe under the driver side from below.Cranked the car,It cranked 2-3 times fine then got stuck. It now refuses to crank, nothing happens.

Battrey as such look good if I switch on headlights they are bright . Do not have mutimeter if battrey needs to be checked .Car's voltmeter (range 10-15 )shows above red zone at about 12 volts What else it can be . Neither the bolt got loose. Ask me the wrong way of doing things.
--
DD-1990 240 DL SW M47II FI 3.1 220 K miles Turbo Sways,Custom headlight circuit ,Insulated roof,Tinted Glass,






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.