The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rough idle for cold start...runs fine once up to temp 200 1986 200 1986

the saga continues....went to clean the throttle body today...when I pulled the air intake hose bellows it snapped off near the throttle body. i replaced this piece several years ago witha scan teck piece which is way mor stiff than the oem unit. I have no idea if there was a crack in the underside of the hose before I messed with it, but I am attempting to fix it. since it didn't snap off totally (just 80%) i used a piece of bailing wire to fashion a staple or hog ring on the other end to hold it together. I then used around 1/2 of a tube of black rtv silicone to seal the crack all the way around. when that has cured I will wrap the whole deal in duct tape. hopefully it holds. would a crack in that bellows make my cold starting difficult? i would think that it wouldn't make any difference at idle since it is up stream from the throttle body which is closed at idle. any thoughts?






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.