The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

A/C Nightmare... 200 1992

I had a compressor go on me a few months ago, so I replaced my Compressor and Evap Canister along with all of the o-rings and the expansion valve. Oil levels are good, and the system is clean. When I started recharging the system the compressor never turned on, and the pressure reads in the red zone. I jumped the pressure switch.. the compressor won't turn on. I even applied 12v directly to the compressor via battery terminal with no results. I can't see what could be going on here? Bad ground? I didn't vacuum the system... which I know will hinder cooling ability, but I thought it would still work. Thanks in advance.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.