The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Plug wire resistance value range needed for a B23F 200

Hello, Heres the deal. I'm still trying to find out why my project car is running rough. I've swapped out the coil & checked (and rechecked) the plug wires

are installed correctly. I have a new set of Magnecor wires on it and a new set of NGK iridium tipped plugs as well so I thought about checking the wire

resistance. I've been told that there's an acceptable range for this. I looked through both the Bentley and the Haynes manuals and I can't find this spec

anywhere. Does anyone know what the resistance is supposed to be? Here are the readings I have. They are (reading from front to back looking down the engine

block)#1)4.30 ohms, #2)4.44 ohms, #3)5.17 ohms, #4) 5.01 ohms. Are these okay? Thanks, Charles (BTW, I also have a new Bosch cap, rotor and hall sensor

installed too.)






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.