The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Tail lights work but I get the bulb failure light 200 1989

We've had a lot of rain down here in Tampa lately. Some water seeped into my driver side tail lamp and blew the bulb in the lower right corner brake light. I replaced the bulb, and everything was fine. Then the failure light started to come on when I turned the headlights on. A tap on the brake pedal would turn it off. Now its on all the time, but the lights still work when the headlights are on, as well as when the brakes are used. I cleaned the bulb sockets and made sure the connectors on the backs of each individual light was making a good tight connection. I have a spare bulb failure relay somewhere. Any suggestions?

Thanks.

Justin






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.