The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Oil leaking badly after oil filter adaptor black seal replacement 900 1995

I was replacing seals on oil return line from turbo, distributor seals, oil filter adaptor seal. It all went well, other that it took me awhile.

Today I fill the car with oil and started it and immediately there's a lot of leaking like almost pouring from the oil cooler areal where I put in the black seal.

I was wondering if i tightened it enough or what else could be the problem.
I put it onto a little bit of silicone grease between two flat surfaces on the oil adapter and on the oil cooler. Then I tightened it as well as I could with and adjustable wrench. I admit i might have not done a good job with tightening it well enough, but this much leaking its awful.

Did i do it right, as far as placing the seal. I did not find any groove to put it in.

thanks a buch

car is 95 944T auto with 129K miles on it.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.