The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Still seeking information on AW transmission swap ref: RPM sensor opening 700

posted by  Paulii on  Thu Aug 21 14:42 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Jun 6 03:04 CST 2014
[RELATED]

Hello, I have done the swap many times. It requires very little work to change the bell housings. Just remove the bolts that secure the bell housing. Use a good all purpose lube and spray around the front pump of the tranny. Use a rubber mallet to coax the lubricant in between the seal and then use mallet to remove the bell housing gently upwards off the front pump housing. When replacing the bell housing make sure the bottom surface is nice and clean. Apply a small amount of silicone gasket maker, I like the grey, along the bottom sealing area. Gently coax the 240 bell housing down and torque the bolts to around 45 ft pounds.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.