The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

rear main seal hemmorraging!

This may be too late, but if it helps: I haven't pulled the tranny on a 245 that I can recall, but one tip on transmission removal that helps on the older ones and may help on yours: buy two long bolts of the same size/thread pitch as the bolts that hold the transmission on and cut off the heads. Use a hacksaw to cut screwdriver slots in the ends of the bolts. When you're removing the transmission, remove two of the transmission-to-motor bolts at diagonally opposite sides, and put these in place, then use them to slide the transmission off and on. Helps a lot in aligning the tranny to the bell housing or to the motor.

More useful with a manual transmission, where the transmission removes from the bell housing, than with an automatic, where the bell housing is part of the transmission - because you may not have the room with an automatic.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.