The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

correct order for bleeding master cylinder - 1st or last? 900 1992

posted by  Big Harry on  Mon Sep 15 07:41 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sun Sep 21 11:06 CST 2014
[RELATED]

If you are bleeding the system the FAQs have a lot of good information, but here is my two cents. 1)Take the lines off of the master cylinder and used a bleed kit from the parts store to bleed the air out of the master cylinder. This will take about 20 minutes. 2)Replace the brake lines and bleed the air out of the junction. 3)Bleed the calipers. Make certain that the caliper bleeders have a hose attached that runs into a jar with brake fluid. This will keep you from sucking air back up into the lines.

Regards,
--
Will Dallas, www.willdallas.us, www.willdallas.org, www.willdallas.com, www.dallasprecision.com 86 245 DL 222K miles, 93 940 260K miles, 88 765 GLE 152K miles






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.