The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

The Project OR Calling all K-jet experts 200 1975

If you remove a vacuum line and spray in a little gasoline, carb cleaner, ether or whatever your favorite combustible is, will it fire right up when cold. I note that you've "bench" tested the cold start valve but that doesn't mean it's working when cranking the motor. I've seen more than a few times the cold start timer/temp sensor loosing it's ground to the motor despite being tight mechanically. You'll find that sensor/timer on the exhaust side of the motor towards the rear of the block. It screws into an intermediate fitting which then screws into the block. Remove the works, clean all the threads and electrical connections and reinstall. Check the corresponding terminal at the starter too. I'm betting that's where the problem lies--of course it doesn't cost me anything to say so.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.