The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

later MC adapter ring 120-130

Danny-

The piece of Aluminum is 3/4 inch thick.

The crossbar is a of flat bar. I took some other pictures with a newer camera, but it will be Monday before I can download them. I think the bar was 1/8" thick by 1-1/2" wide.

Sorry, I forget how long the bolt is that I used. I think it was 5 or 6" long, and 5/16" thick bolt.

Ron answered the question about the switch. The bracket and switch is a nice little setup. I remembered I had to cut a little bit off the bracket to make it all fit, but not sure exactly where. I think the 240 switch will work too, and can be grabbed from pick and pull JY for next to nothing.

I upgraded the switch because I upgraded my MC. Just liked the idea how it functioned and thought it was a good time to do it since it has a dual function (brake switch and a brake piston rod retainer).

Also, if you want me to take my setup apart to get measurements and take a couple of picture, I can do that too.

Paul






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.