The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

FYI on Ignition switch replacement 900

posted by  lightbulbguy on  Fri Oct 3 07:30 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Aug 16 15:17 CST 2012
[RELATED]

I just replaced my ignition switch on my 1996, 960 and it was a little different than the FAQ section. My screws were T-20 torx and the 4 screws in the corners of the bottom cover were recessed pretty far up in the cover, so my socket wouldn't reach all the way up there. i needed a torx screw driver. Secondly the tilt wheel lever had to come off. It's held on by a 3mm hex head set screw. Once i figured that out everything went according to the write up in the FAQ. Only took about 20 minutes.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.