The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Some Testing Results - 3rd Ground? 1800 1971

Thanks. Given my past history with timing, I tend not to loosen the collar and I pull the whole thing as a unit. Of course the thing won't idle at all, so I can't do anything other than set static timing.

I've not checked the dizzy ohms yet but will shortly.

First off, the Volvo Fuel Injection Fault Tracing manual is a great resource. I keep forgetting about all the resources over at Volvo1800Pictures.com. Thanks Frederik!!

I was just out testing the Ohms of the sensors and found that most things are slightly below spec - but the coolant temp sensor seems to fail the standard volvo tests.

My sensor test results...
Ohms between the pins on the coolant temp sensor comes in at around 1990 when it should read between 2100 and 3100. It completely fails the pin-to-ground ohms test. The MAP sensor comes in at 93 ohms and 345 ohms, which is very close to spec (>90 and >350 are good). My spare MAP gave the same readings so I'm not too worried about that. The air temp sensor comes in at 255 when spec is 260+. Also a little weird, but they do pass the ground continuity test.

I'm actually thinking that I missed something important. From what I've read, I think there's a third ground strap (#1 battery to body, #2 bellhousing to frame) The fault tracing manual suggests that (#3) the manifold itself is also grounded to the body. I do kinda remember a third strap from manifold to the body... However, I have Ohm-tested the body to manifold a couple times and come up with "Infinite" so maybe this is not an issue.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.