The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Timing belt ...could be more to it 200 1980

Old belts that fail from high mileage tend to snap in two. If your timing belt has stripped teeth, you should check the camshaft for free rotation. In my experience stripped teeth indicate the camshaft is beginning to seize in it's bearings - due to a blockage within the oil passage in the head gasket.
Start the repair and when the belt is off, spin the cam with a socket and 3/8 ratchet. The cam should "back-up" every now and then as the lobes move across the shims. If it simply turns in one direction, and with substantial effort, then pull the cam out and check the bearings. You may also find that the cylinder head is relatively "dry", and has little oil left in the pockets around the lifters.
If it spins freely, and the head is very wet, then just replace the belt. Check the tensioner as well.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.