The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

OD Wiring Help: Auto to M46 200

So I need a bit of help installing an M46 into my originally automatic '85 240 (really a '75, but all the internals are '85). I've got everything installed, the car is up and running, but I can't figure out the OD wiring. From the relay mounted up in the dash, the wiring harness takes 2 wires over to the dash cluster (for the lights I presume), and 3 wires down to a 3-prong connector. I have the other end of the connector from the automatic with 3 prongs on it, and it looks like there are 2 grey wires (for the OD switch on the shifer) and a white wire - not sure where this goes. I also can't seem to find where I need to plug in the 2-prong connector that goes to the solenoid and to the 4th gear switch.

Was this little OD harness from the relay down different in the auto equipped cars? Do I need to grab this little harness section from an M46 equipped car?

Thanks in advance!
-Phil






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.