The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

Idle speed adjustment question (perhaps stupid) 200 1987

posted by  Stickbuilder on  Tue Oct 21 08:38 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 03:31 CST 2014
[RELATED]


there are two wires in the blue plug. One is white with a blue tracer. The other one is pink. The pink wire is used with a dwell meter to set the mixture screw in the AMM. DO NOT GROUND THE PINK WIRE. YOU WILL KILL THE O2 SENSOR!!!!

Make a jumper wire with a spade conector that will mate with the blue/white connector. install an alligator clip on the other end of the jumper. Plug the spade connector into the blue white wire in the blue plug, and attach the other end (the one with the alligator clip) onto the negative terminal of the battery.

Adjust the base idle. Then remove the jumper, and the car should then idle correctly.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.