The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

timing marks 900 1992

posted by  rileyman on  Tue Oct 21 12:35 CST 2008
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 10 06:44 CST 2014
[RELATED]

Well...I got the new head on, new water pump, belt, tensioner, idlers,etc....I pulled the pin on the tensioner and rotated the engine by hand for two revolutions. The exhaust cam was off by one tooth; the intake and crank were right on... So I took it apart and started over; re-did the belt, tensioner etc....Pulled the tensioner pin again; rotated the engine by hand for 2 revolutions and now the intake timing mark is one tooth off but the crank and exhaust are lined up...Will this effect anything...Or do I have to do it all again?.....The car is a 1992 960 6cyl....






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.