The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Installing a Tach. Do I need the small clock too? 200

This weekend I pulled the instrument panel out to install a tach I took from a junked brick. I also have the small clock, but realized I forgot to pull the small clock wiring harness. Anyone know if the small clock is needed to complete the electrical circuit, or can I skip it?

Right now the whole panel doesn't work, including the odo and speedo, and I need to isolate the problem. I'm consulting Dave Barton's tach install post http://www.davebarton.com/240tachinstall/ .

I noticed that the tach has 2 prongs to connect to the ignition coil instead of 1. Anyone know why? According to Barton's post there should be 3 prongs at top for the clock, and one on the bottom for the red and white cable that's connected to the coil. I've got 2 prongs on the bottom and don't know which to use.

I posted some notes on my blog: http://jayboucher.com/blackbrick/archives/63
--
...
'92 245, Black & Tan, Virgo Mags, 140K
My Black Brick blog.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.