The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Idle Air Valve 200 1985

Yesterday, I removed the Idle Air Valve and cleaned it. It worked like a champ until mid day today, and the symptoms were the same (high engine speed at about 1500 RPM no load idle). I ordered a new one, and it should be here on Monday. On the old one, I can tap the housing with a screwdriver handle, and the idle will drop to 700, and will hold until the engine is revved up again, and it will go back to the high idle speed. I talked with the tech at FCP Groton, and he says that it's the valve that has finally given up the ghost. I wish I had a pick and pull nearby, but I don't, and the local salvage yard won't even take a Brick, and if they are forced to, it goes to the crusher immediately. Thankfully, I repositioned the hose clamps to where I can reach them with the hoses installed on the intake manifold, and the intake tube.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.