The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

i have opened up the suspect ecu. 700

well i had another used ecu put in last week and so far 100 miles with no problems.

so today i decided to open up the ecu and see if i could see a bad solder joint or something.

i immediately noticed upon getting it open that on the right side (plug facing forward) there is a 1" x 2" board that appears to be coated in silicon with these two raised pyramid things on it that have a black cross across the top of them. on one of them the surface is broken a bit and there appears to be a hole in it (the metal cross is exposed). could this be the cause of my ecu woes? i am guess it should not be like this.

if i can find my torx bits i will remove the board to look for cracked solder joints on the other side.

i will try to take a picture later tonight.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.