The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

740 wagon running cool 700

Hello
I recently serviced the flame trap on my normally-aspirated B230F engine. To do so, I removed the throttle body and intake manifold. I used new gaskets to reassemble and also replaced any hoses which looked tired.

It may not be related to the above work, but shortly thereafter I began to notice the temp gauge barely gets out of the 1/4 range. (The needle has always been in the 1/2 position once the car is warm.) The ambient temperature is in the 40's and 50's.

The other symptom is noticeable upon starting. The initial idle is way too slow, about 300 rpm compared to the 650 rpm it usually runs at. I have to give it a little gas to avoid stalling. Once on the road, the car runs fine except for the low temp gauge reading.

Any ideas on what I might look for to solve this mystery?

Thanks
740 in Phoenix






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.