The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

B16 Alternator mounting questions 444-544

I have been running an alternator on my B16 equipped 444 for around 6 months now without problems.
The alt. is a 65amp early GM type with a remote voltage regulator.
I used the stock bracket mounted to the block with the stock hardware. The modifications were an Alum. 1" round bar with a .375" hole thru it, cut to just fit between the "ears" of the bracket. This lets the stock bracket share the vibration and loads on both ends. 3/8-16" all thread goes thru this, the alt. and the bracket (Use Nylock or some such nuts). The alternator is modified by removing about .375" from the rear of the bottom mount boss, it is the same unit I was running on my B18b 122. There is the same relationship between the bracket location and the waterpump pully on all the red block engines until the factory started installing the alts. on the B20s (1970?).
Here is a photo showing the Al. Bar and the rear of the alternator.

Cheers & Good luck!
OK
-
-






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.