The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Start, no run 200

Ok, update: somehow the ignition wire *fell* off the dist. cap (?!) and once I secured that it ran MUCH smoother (It actually arced across a 1 1/2 inch gap, which is how I noticed it was loose). No more smoke or intense squealing.

It still sputters though, and I can't figure out why. It looks a little 'wet' around the 3rd and 4th fuel injectors, right next to the flame trap t-junction. It has plenty of oil, but it smells kinda like gas. I just replaced the rotor and cap with the wires and plugs along with a new battery not too long ago.

When I say sputter, I mean the car loses power for half a second - just enough to make it hesitate. It's not so bad at WOT, but I try to abstain from that. It's at it's worst at lower RPMs with light throttle (probably between 800 - 1400).






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.