The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

DIY low cost Strut Braces

posted by  Redwood Chair on  Wed Mar 4 03:23 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Tue Feb 25 21:29 CST 2014
[RELATED]

Nice fabrication job!
Heat will help when working mild steel like that pipe.
Stainless is very malleable and can be found at your local
metal recycling yard for cheap.
A bit of bling and no paint needed.

Tubing under compression is very strong.
If you can do a straight run it will be very light.

OEM 240 firewall braces are slightly larger diameter,
and lighter gauge than 1/2" EMT.
However the OEM braces are @$50 used,
and tend to loosen up because of the slot at the firewall.
Drill a 6mm or 1/4" hole and file it for a tight fit.
FYI The firewall is threaded for 7mm ΓΈ x 1mm pitch.

I made a straight run strut tower brace for my 86-245,
but the 83 245 TIC I have now has the tall oil filler valve cover
right where the tubing needs to run.
--
71-145-S






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.