The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

740 no start 700 1986

As was suggested a compression test would be in order.

The car may have poor compression from sitting and having the rings get a little sticky. The gasoline that is injected each time you try to start it washes the cylinder walls down further reducing the rings ability to seal and create compression.

Disconnect injector wires

Crank engine over to clear gasoline from cylinder; remove spark plug wires; crank it again.

Squirt two tablespoons of engine oil into spark plug holes; crank engine over to distribute oil. Squirt another tablespoon of oil in and crank over a couple of times.

Reinstall spark plugs (new plugs would be a nice addition).

Reconnect injector wires.

Try to start. If it starts let it run until it reaches normal operating temperature. Sometimes sticking rings will loosen up almost immediately while other times it takes much longer.

Good luck and let us know how it works out.

Randy






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.