The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Bleeding Brakes S90-V90

Start at the rear driver side, rear passenger, front driver, front passenger.
Never mind the two bleeder valves at the rear calipers, use the top one for bleeding. perhaps is a type of caliper also used in other cars mounted to the rear of the wheel.
Have someone helping you. Fill the reservoir. put a clear hose on the beading valve and into a container. Then, as the other person pushes on the brake pedal you open the bleeder valve. When the helper riches the floor you close the valve and the helper return the pedal up. You know. You say "down" and open the valve. Close the valve and say "up". Repeat the process until you see the lither color new fluid and no bubbles are present. Check the reservoir often and refill as the fluid goes down. Prevent the fluid going too low and get air in the master cylinder. Move to the next caliper.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.