The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

123 Ignition vs. Crane Fireball XR700 1800

Hello,

The correct way to connect the Smiths tachometer with the xr700 is to connect the yellow wire from the xr700 to the white wire that used to be connected to the distributor.

The white wire should run to the back of the tachometer to the inductive clamp and then on to the negative post on the coil as a continuous piece of wire with no breaks.

DO NOT CONNECT TO THE POSITIVE SIDE OF THE COIL!!

Also make sure you have power and a good ground to the back of the tachometer.

The green power wire plugs into the back of the tachometer with a blade connector and the ground is supplied though a black wire that connects to one of the mounting posts of the back of the tachometer.
--
Eric
Hi Performance Automotive Service (formerly OVO or Old Volvos Only)
Torrance, CA 90502






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.