The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

b20 cams 140-160

Paul, I don't have detailed measurements on the Schneider cams, other than what's necessary to degree them in. Typically they have .300" cam lift (roughly .438" valve lift), and make excellent power with only that much. Recommended lash is either .012" or .014" depending on the specific grind. So far, I think I've had from them:

264 degrees / 110 LSA (torque cam for SUs)
274 degrees / 110 LSA (SP cam for SUs, stock bore D-jet)
274 degrees / 108 LSA (SP cam for big-bore D-jet)
284 degrees / 107 LSA (hot street/rally for big-bore D-jet or Webers)
288 degrees / 109 LSA (B18 vintage racer w/ SUs)

They've all had very wide, flat torque curves (except for the 288 B18, but I don't think they ever got the carbs tuned right) and decent peak numbers -- I tend to go for area under the torque curve rather than peak HP, and they do that.

BTW, the company started in the early '50s as Schneider & Crower, although they soon parted ways -- they've been at this for a while. It's still a small family business.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.