The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

wiring harness repair 200

posted by  pageda on  Sun May 24 10:40 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Oct 24 13:18 CST 2014
[RELATED]

You are right not wanting to disturb the wire harness, these can be replaced by re routing wires from the grey connector to the component. Snip the wires off near the connectors and splice in a new replacement wire.

#1..SB....Oil pressure sender (SB = black)
#2...Y....Water temperature gauge sender
#3...R....Alternator D+/61 (the thin red wire on the alt. back)
#4........Empty -- used on carb. models
#5..BL-Y..Starter solenoid (two thin wires there, note how they attach)
#6........Empty -- used on Diesel models
#7........Empty -- used on Turbo models
#8........Empty -- used on Diesel models

You should be looking for an updated harness at the bone yards or ebay for future replacement.

Check to see if Dave Barton has one.

http://www.davebarton.com/volvoharnesses.html

Dan






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.