The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

wiring harness repair 200

Hi Dan,

I've noticed on the ones that I have rewired, that the wiring behind the connector body to the firewall did not show the same heat degradation as the wiring on the engine side. My approach was to use the OEM type of connector that Volvo now uses (from sherco-auto.com), and completely rewire from the firewall down. I use a stranded thhn(plastic overcoat)wire that will hold up in the heat and oil environment and both crimp and solder all of my connections, reusing the sensor connectors when practical. I also pull any grounds that were originally broken through the connectors into a separate run and make multiple chassis ground points to tie them together.

Regards,
--
Will Dallas, www.willdallas.us, www.willdallas.org, www.willdallas.com, www.dallasprecision.com 86 245 DL 222K miles, 93 940 260K miles, 88 765 GLE 152K miles, 88 780 246K miles, 93 Buick LaSabre 119,000 miles






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.