The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

No start 240 200 1989

Hello everybody, new poster,
My car never had any problems running after it was started. A couple times it didn't want to start right up on a cold start It acted like the engine got flooded. Then one day it refused to start altogether.

There is no spark coming from the coil. I checked the timing belt and replaced the rpm sensor. Coil ohms are up to specs and there is voltage coming to both sides when the key is in the on position. I tried to check for pulsating voltage on the 1 terminal during crank, but my voltmeter couldn't really tell if it was pulsating or not. The voltage was dropping to about 10.5 but that might have been due to the load from the starter. Is there a good way to check the ignition amplifier or does anybody have any other ideas? I did clean the terminals between the amplifier and the coil.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.