The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Speedometer sensor in rear 700 1992

posted by  fborcher on  Thu Jun 4 05:32 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Fri Feb 24 13:25 CST 2012
[RELATED]

Thank you for you response. As you indicated, it was not necessary to remove the old sensor. I unplugged the old connector, and the green/white wire was broken at the top of the connector.
I cut the other wire, and found that the connector could be disassembled into 3 parts.
I was able to drill-out the old wire(much like alternator brush replacement)in the rubber components. This left the female brass contacts. I pushed the wire back thru the rubber part, soldered the brass contact onto the wire, placed the 2 contacts back into their rubber housings, put the rubber contacts back in the plastic housing, and snapped it shut.
Just like new. I have ABS and a speedometer again now.





USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.