The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE Replies to this message will be emailed.    PRINT   SAVE 

B20E 140-160

1.Widen the chamber to 92mm front to rear if it's not already, use an old head gasket as a template.
2.Put an eyebrow in the block on the inlet side only.
3.Remove metal from the sharp corners each side of the plug.
4.Try and make it flat to concave around the side of the chamber leading up to spark plug from the inlet valve.
5.Lay back the quench area on the spark plug side.

OR Do I just need to find an "F" Head!!!???

Well if you can port the exhaust (which is harder than you think) the F head is capable of flowing a lot better on the exhaust side.

If I were you, I'd queue up for a VPD head. Which one you want would depend on what you want to do with it. If you want fuel economy & are staying with D-Jet injection, the economy F head which just has porting on the exhaust & dual springs is what you want, I think it's $650.








USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.