The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Injector problem - ECU pins 9 and 18? 900 1992

Hi,

I'm trying to trace a no-start problem in a 1992 Volvo 940 Turbo, LH 2.4 ECU 0-280-000-937.

The problem is the fuel injectors aren't operating even though the spark plugs are firing and there is good fuel supply to the fuel rail.

Following the Bentley book's procedures for testing the pins at the ECU connector, I found there was no continuity between pins #9 and 18 (fuel injector ground). Bentley says 4 ohms should be present. There is continuity between pin 18 and the injectors themselves.

Two questions:
1. Does the above test (ie continuity) apply to the LH 2.4 Turbo ECU?
2. If so, is there any likely location for a fault in this circuit?

I'll note I've replaced the crankshaft position sensor and tested or swapped every component I can think of short of the ECU. I just want to settle a nagging doubt before moving to the next step of the ECU itself.

Thanks for any help.











USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.