The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

CEL - knock sensor - running lean? 900 1993

Non-turbo car, Regina.

Have had an intermittent problem with a CEL and a 1-4-3 code. Sensor has been replaced and is properly torqued, electrical connection has been cleaned, wire is routed away from alternator and has a ferrite core mounted on it to help mitigate RF interference. Wire routing and the ferrite helped for a long time.

Today, this got more severe. It comes back promptly after being cleared. There are NO other codes.

I am starting to suspect the fuel supply may be compromised, causing it to run lean and leading to detonation under certain conditions. At 120K, it's on the early side for the pump to fail, but the fuel filter is old, probably original. The car doesn't stall, doesn't hesitate, but does not have much power and acceleration is lousy (even before CEL comes on).

Thoughts?

John






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.