The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

M41 front seal 140-160

"From a parts breakdown it seems to show a seal, gasket and O-rings for the three housing bolts. Is that correct?"

Yes.

"Do you just pull the bolts and replace the seal, gasket and O rings?"

Yes.

"Any chance the front shaft will fall out in the process?"

No, but still be careful anyway.

"While I'm at it how hard is it to change the front bearing. It seems quiet. Just leave it be?"

Technically, you can change it without disassembling the gearbox, but it would be super difficult. Much easier to change when you have the gearbox apart. My opinion is if it is quiet and you have no reason to think it's bad, leave it.

I have never had a problem installing the bell housing first and then the gearbox to the bell housing. Of course this is referring to a M4, M40, M41. Actually, I don't think I've ever done it any other way.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.