The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

164 steering column 140-160

posted by  Caliban on  Tue Jul 28 15:10 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Sat Aug 11 14:05 CST 2012
[RELATED]

I don't think so. Even if they did, one would have to deal with the difference in ignition/steering lock mounting. I had the same issue on my '70 164 and I replaced the entire column. It really was not that difficult. I took a sharp hacksaw and sawed a blade screwdriver slot into the shear bolts large enough to fit my biggest screwdriver. This worked for one bolt, but the other one was too tight. I ended up taking a set of good vice grips to the exposed threads on the stuck bolt enough to loosen it, and then used the screwdriver "slot". I finished up with a tap on both bolt holes.
Nick






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.