The message to which you are about to reply is shown first. GO TO REPLY FORM



 VIEW    REPLY TO THIS MESSAGE    PRINT   SAVE 

Missing header support bracket 200 1990

posted by  vvpete on  Tue Sep 29 11:28 CST 2009
Author: [PROFILE] [EVERY POST] [THREADS] [BEST POSTS] RSS Feed     [IGNORE ALL POSTS]
last visit: Thu Jul 10 14:10 CST 2014
[RELATED]

It's actually a simple L Bracket with a single slot on the bottom and two slots on the front side for bolting it to the trans bracket.

Earlier 240 set-ups and 740's had an 'S' type wire bracket with two clamps and two bolts that mount the 'S' bracket to the header pipe, and another clamp that mounts to the trans bracket. Either type can be used, but the simple L bracket is the cheapest of the two.

Also I would get the bolts from the dealer unless you have a good source for Grade 10.8 metric bolts, washers & nuts (same as grade 12 SAE) as the cheap ones from places like Lowes/Home Depot don't hold up with the heat. I found some at an industrial supply store, but had to buy a box.






USERNAME
Use "claim to be" below if you don't want to log in.
PASSWORD
I don't have an account. Sign me up.
CLAIM TO BE
Use only if you don't want to login (post anonymously).
ENTER CAPTCHA CODE
This is required for posting anonymously.
OPTIONS notify by email
Available only to user accounts.
SUBJECT
MODEL/YEAR
MESSAGE

DICTIONARY
LABEL(S) +
IMAGE URL *
[IMAGE LIBRARY (UPLOAD/SELECT)]

* = Field is optional.

+ = Enter space delimited labels for this post. An example entry: 240 muffler


©Jarrod Stenberg 1997-2022. All material except where indicated.


All participants agree to these terms.

Brickboard.com is not affiliated with nor sponsored by AB Volvo, Volvo Car Corporation, Volvo Cars of North America, Inc. or Ford Motor Company. Brickboard.com is a Volvo owner/enthusiast site, similar to a club, and does not intend to pose as an official Volvo site. The official Volvo site can be found here.